03 Jan Winter Streamer Tactics
Posted at 08:00h
Water temperature ~ First, it has to be at least warm enough that the river isn’t frozen solid. Some ice may be present
for you to successfully catch trout on streamers. The less ice the better obviously, but I’ve seen
plenty of trout taken with ice on the surface of the river, in the guides and and even on the
Lower and slower~ Probably the single most important tip is to get your fly down deeper and slow down your presentation.
Winter water temperatures below 40* will slow the metabolism down a trout so mirror that with
your fly and give the fish time to come and get it.
Once you’ve placed your fly, make a good mend and feed some line and give the fly a second
or two to get down to where the fish are. How much you feed will depend on the depth and
speed of the water your fishing as well as other factors like the weight of the fly ( if it is at all) the
sink rate of your line. Or if your fishing a sink tip or if your adding weight to your leader. More on
Once you think you have your fly at the desired fishing depth….pretty close to bottom, make
your strips and or tip movements slower. As you’ve also probably heard a thousand times, let
your fly swing. Even make your entire presentation a “steelhead swing”. After you’ve made your
first mend and perhaps feed of line, keep mending upstream, slowing the swing speed of the fly.
Fly Size ~ And although you probably anticipate me telling you to downsize your fly size, I actually prefer to
start with a large fly first and see if they’ll move. I find myself typically starting with a size #1
single or even triple articulated pattern. That equates to about a 5 or 6” fly. Why? An articulated
fly swims better. Especially when not being jerked and stripped real fast. And, I’m a firm believer
that big fish like big food. Then I’ll try different colors. What determines what colors I fish
depends on the specific river and the environmental factors like water color and water levels. If I’m on the Big Hole
my streamer probably has some copper or
rusty brown. Maybe even a little yellow if the water is a little off color. If I’m fishing the Madison
I’m usually starting with
something neutral like olive then going to brighter colors like white. If white doesn’t get any strikes I’ll go back to darker tones, or good old black.
The Right Stuff
~ Fly rod and line choices should parallel the size of the water your fishing as well as the size of the fly and the fish your angling for. If you are fishing smaller creeks and streams, a nine foot five weight is most likely more than adequate. I usually fish a nine and a half foot six weight that’s loaded with a seven weight sink tip line. It loads in one back cast allowing me to spend less time false casting. For angling in big water, newer trout/spey models are becoming very popular. For fly lines I fish a sinking tip of about five to six feet with a fairly fast sink rate of six to seven inches per second. I like how Airflo’s Streamer Max
sink tip fly line cast’s (like a shooting head) and gets the fly down quickly. I’ll cut off the front fifteen to eighteen feet of the twenty three feet of weighted tip on a seven weight which loads the six weight with enough grains to load the six rod properly. This will seem like a short tip to some but it’s easier to cast and manipulate a shorter tip. Heavier, faster water will require heavier and longer sinking tips to get your fly to the correct fishing depth. If a six foot sinking tip isn’t getting strikes, try a ten foot tip. If that’s not cutting it, go longer to a Teeny Fly Lines
T200 or T300 grain twenty three foot tip, or add a little weight to the leader. The classic school of thought is keep going heavier until you find the ‘sweet spot’.
To learn more about Montana fly fishing and guided trips in SW Montana go to www.mtfishtales.com